Loading ...
Loading ...
Loading ...
2. Turn the cover counterclockwise and re‐
move.
3. The upper bulb is the high beam/headlight
flasher and the lower bulb is the daytime
running lights.
High beams/headlight flasher
55-watt bulb, H7.
1.
Tip the connector with the bulb up slightly
and pull out carefully.
2. Pull the bulb off the connector and insert
the new bulb.
3. Install the new bulb in reverse order of re‐
moval.
4. Place the cover according to the arrow
markings on the headlight housing.
5. Close the headlight housing with the lid.
Daytime running lights
21-watt bulb, W21W.
1.
Turn the bulb holder counterclockwise and
remove.
2. Carefully remove the bulb from the socket.
3. Install the new bulb in reverse order of re‐
moval.
4. Place the cover according to the arrow
markings on the headlight housing.
5. Close the headlight housing with the lid.
Xenon headlights
Safety information
DANGER
There can be high voltage in the lighting
system. There is danger to life. The manufac‐
turer of your vehicle recommends that the
work on the lighting system including bulb re‐
placement be performed by a dealer’s service
center or another qualified service center or re‐
pair shop.◀
Overview
1 Parking lights / daytime running lights
2 Low beams/high beams/headlight flasher
3 Turn signal/side marker light
Xenon headlights
Low beams and high beams are designed with
xenon technology.
The parking lights and daylight running lights
are made using LED technology.
In the case of a malfunction, contact a dealer’s
service center or another qualified service cen‐
ter or repair shop.
LED headlights
Light-emitting diodes (LEDs)
All front lamps and side turn signals are de‐
signed with LED technology.
Seite 237
Replacing components Mobility
237
Online Edition for Part no. 01402977904 - II/17
Loading ...
Loading ...
Loading ...