Loading ...
Loading ...
Loading ...
Replacing the bulbs
1. Loosen the three fasteners, arrows 1, on
the bulb holder and remove the bulb holder
from the tail lamp, arrow 2.
2. Press the nonworking bulb gently into the
socket, turn counterclockwise and remove.
The turn signal is the upper bulb and the
brake lamp is the lower bulb on the bulb
holder.
3. Proceed in the reverse order to insert the
new bulb and attach the bulb holder. Make
sure that the bulb holder engages in all fas‐
teners.
Installing the tail lamp
1.
Attach the connector to the tail lamp.
2. Place the cover on the three fixing points,
arrows, and push in. Make sure that the tail
lamp engages in the fasteners.
3. Screw the two nuts tight and mount the
cover.
Lights in the tailgate
General information
Observe the safety information, refer to
page 235.
Reversing lights: 21-watt bulb, P21W
Inner brake lamp: 21-watt bulb, H21W.
Accessing the lights
1. Open the tailgate.
2. Pull out the cover at the recessed grip, ar‐
row.
3. Detach the connector.
Replacing the reversing lamp and inner
brake lamp
1.
Detach the bulb holder from the tail lamp.
The reversing lamp is the upper bulb and
the inner brake lamp is the lower bulb on
the bulb holder.
2. To replace the reversing lamp, pull off the
bulb carefully.
To replace the inner brake lamp, push the
bulb down and turn it to the left.
Installing the bulb holder
1.
Attach the connector to the tail lamp.
2. Proceed in the reverse order to insert the
new bulb and attach the bulb holder.
Ensure that the bulb holder is firmly at‐
tached.
Seite 240
Mobility Replacing components
240
Online Edition for Part no. 01402977904 - II/17
Loading ...
Loading ...
Loading ...