Loading ...
Loading ...
Loading ...
Headlight setting
The headlight adjustments can be affected by
changing lights and bulbs. After the headlight
adjustment was changed, have it checked and,
if necessary, corrected by a dealer’s service
center or another qualified service center or re‐
pair shop.
Front lights, bulb replacement
Halogen headlights
Overview
1 High beams/headlight flasher
2 Low beams
3 Turn signal/side marker light
4 Parking lights
5 Daytime running lights
Accessing the low beams and parking
lights
Observe the safety information, refer to
page 235.
1.
Open the hood, refer to page 223.
2. Turn the cover counterclockwise and re‐
move.
3. The upper bulb is the low beam and the
lower bulb is the parking lamp.
Low beams
55-watt bulb, H7.
1.
Tip the connector with the bulb down
slightly and pull out carefully.
2. Pull the bulb off the connector and insert
the new bulb.
3. Install the new bulb in reverse order of re‐
moval.
4. Place the cover according to the arrow
markings on the headlight housing.
5. Close the headlight housing with the lid.
Parking lights
5-watt bulb, W5W.
1.
Remove the bulb holder.
2. Carefully remove the bulb from the socket.
3. Install the new bulb in reverse order of re‐
moval.
4. Place the cover according to the arrow
markings on the headlight housing.
5. Close the headlight housing with the lid.
Accessing the high beams/headlight
flasher and daytime running lights
Observe the safety information, refer to
page 235.
1.
Open the hood, refer to page 223.
Seite 236
Mobility Replacing components
236
Online Edition for Part no. 01402977904 - II/17
Loading ...
Loading ...
Loading ...