Loading ...
Loading ...
Loading ...
Page |
6
water inlet valve of the refrigerator needs to
be between 30 and 120 p.s.i. (2.06 and 8.27
bar). The installation must correspond to the
local plumbing regulations.
A separate shut-off valve should be installed in
the cold-water inflow. The shut-off valve should
not be located behind the appliance. It is
recommended that you mount the shut-off valve
directly next to the appliance or at another place
which is easily accessible.
When installing the water connection, pay
attention to the permissible installation area for
the water mains. For connection to the drinking
water mains use only water pipes which are
suitable for drinking water.
Observe national regulations and the
connection conditions of the local water supply
companies.
Getting to know the appliance
THERMADOR under-counter Double Drawer
Refrigerator units can be freestanding or built-in
and are available in a number of configurations.
These operating instructions refer to several
models; the diagrams may differ.
1. Cabinet
2. Touch control (over Top Drawer)
3. Top Drawer
4. Handle (“Professional”* Style shown)
5. Bottom Drawer
6. Toe-Kick
7. Leveling legs
8. Aluminum separator (long)
9. Mat
10. Aluminum separator (short)
11. Ice Bucket
12. Ice Maker
13. Replaceable Water Filter
NOTE: Overlay model does not include
the stainless door or the handle.
NOTE: The mats are not washable in
dishwasher machine.
WARNING
To avoid the appliance tilting due to
unbalanced overweight do not pull out both
drawers at the same time. Always close one
of the drawers before pulling out the other
one.
4
4
1
3
5
7
6
2
9
9
10
8
11
12
13
Loading ...
Loading ...
Loading ...