User Manual - Page 69

For 2020 MAZDA 3 HATCHBACK.

Loading ...
Loading ...
Loading ...
2. Anchor bracket
(5–Door)
1. Tether strap
2. Anchor bracket
3. Forward
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the incorrect
tether anchor position is dangerous. In a
collision, the tether strap could come
o
and loosen the child-restraint system. If the
child-restraint system moves it could result
in death or injury to the child.
Always install the head restraint and adjust
it to the appropriate position after
removing the child-restraint system:
Driving with the head restraint removed is
dangerous as impact to the occupant's
head cannot be prevented during
emergency braking or in a collision, which
could result in a serious accident, injury or
death.
Refer to Head Restraints on page 2-17.
Installation on rear center seat
The ISOFIX/LATCH
*1
lower anchors at
the center of the rear seat are much further
apart than the sets of ISOFIX/LATCH
*1
lower anchors for child-restraint system
installation at other seating positions.
Child-restraint systems with rigid ISOFIX/
LATCH
*1
attachments cannot be installed
on the center seating position. Some
ISOFIX/LATCH
*1
equipped
child-restraint systems can be placed in the
center position and will reach the nearest
ISOFIX/LATCH
*1
lower anchors which
are 434 mm (17.1 in) apart. ISOFIX/
LATCH
*1
compatible child-restraint
systems (with attachments on belt
webbing) can be used at this seating
position only if the child-restraint system
manufacturer's instructions state that the
child-restraint system can be installed to
ISOFIX/LATCH
*1
lower anchors that are
434 mm (17.1 in) apart. Do not attach two
child-restraint systems to the same
ISOFIX/LATCH
*1
lower anchor. If your
child-restraint system has a tether, it must
also be used for your child's optimum
safety.
The procedure is the same as the
installation for the rear outboard seats.
*
1 ISOFIX (Mexico)/LATCH (Except
Mexico)
Essential Safety Equipment
Child Restraint
2-53
Mazda3_8HZ1-EA-19G_Edition1_old 2019-5-17 13:49:03
Loading ...
Loading ...
Loading ...