Loading ...
Loading ...
Loading ...
LOADING PAPER
2-3
2
3
Gently push tray 1-tray 2 into the machine.
Push the tray firmly all
the way into the
machine.
4
Set the paper type.
If the paper size was changed from an inch size to an
AB size, or from an AB size to an inch size, or if the
paper type was changed, be sure to change the
appropriate settings as explained in "Setting the
paper type and paper size" (See page 2-14).
5
Loading paper in paper tray 1/tray 2 is now
complete.
Changing the paper size in paper tray 1 - tray 2
To change the paper size of tray 1 - tray 2, follow the steps below.
This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading
paper, see "Loading paper in paper tray 1 - tray 2" (page 2-2).
1
Remove the paper size guide.
With the base of the tray pressed all the way down,
hold down the hook at the bottom on the paper
size guide and pull the paper size guide up slightly.
2
Adjust the paper size guide to the paper
size to be used.
Paper sizes are inscribed at the slot (A) on the
bottom of the tray and at the hole (B) at the top of
the paper size guide. ("LT" indicates 8-1/2" x 11"
size.)
Align the bottom of the paper size guide with the
slot, and align the hole at the top with the locking
tab.
NOTES
● Do not place heavy objects on the tray or press
down on the tray.
● Before changing the paper size of tray 1, raise the
paper guide.
Hook
Tray 1 Tray 2
Paper guide
NOTES
● When attaching the paper size guide, make sure
that the top and bottom of the guide are aligned to
the same paper size.
● If the top and bottom of the paper size guide are not
aligned to the same paper size, skewed feeding
and misfeeds will result.
A4
LT
LT
A4
(A)
(B)
dragonII_copy_sec.book 3 ページ ２００６年１０月１８日 水曜日 午後７時３９分
Loading ...
Loading ...
Loading ...