Loading ...
Loading ...
Loading ...
On the right side, take the button with the
fuel pump symbol out of the holder toward
the front if necessary.
4. Squeeze the lower clips, arrows 2, and take
out the bulb holder.
5. Apply gentle pressure to the bulb while turn‐
ing it to the left for removal and replacement.
6. Re-engage the bulb holder so that it audibly
clicks into place.
7. Replace the cover.
Inside brake lamps in the tailgate
1.
Switch off the lamps and take the remote
control out of the ignition lock.
2. Take the warning triangle out of the bracket,
refer to page 254.
3. Release the screws of the tailgate panel, ar‐
rows.
4. Unclip the tailgate panel by pulling it down‐
ward.
5. Push out the handle for opening manually in
the event of an electrical malfunction, refer
to page 36, insert it through the opening,
and take off the panel.
6. Release the bulb holder with the clip, see ar‐
rows, and remove it.
7. Apply gentle pressure to the bulb while turn‐
ing it to the left for removal and replacement.
8. Re-engage the bulb holder so that it audibly
clicks into place.
9. Insert the handle for opening manually
through the tailgate panel opening and
press it in.
10. Reattach the tailgate panel.
License plate lamp, center brake lamp,
and roadside parking lamp/tail lamp
These lamps are made using LED technology.
Contact your service center in the event of a
malfunction.
Changing wheels
Notes
Your vehicle is equipped with run-flat tires, refer
to page 236, as standard equipment.
They do not need to be replaced immediately in
the event of a puncture.
No spare tire is available in the case of a flat tire.
When mounting new tires or changing from
summer to winter tires or vice versa, use run-flat
tires for your own safety.
The tools for changing wheels are available as
accessories from your service center.
Seite 250
Mobility Replacing components
250
Online Edition for Part no. 01 40 2 914 595 - VI/12
Loading ...
Loading ...
Loading ...