Loading ...
Loading ...
Loading ...
6. Remove the bulb.
7. Insert the new bulb.
8. Fold up the wire bracket and lock it.
9. Plug in the connector.
10. Reattach the cover.
11. Low beam: attach the folding cover in the
wheel arch.
Parking and roadside parking lamps
5-watt bulb, W5W
1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Remove the high beam cover, refer to
page 247.
3. Pull out the bulb socket, see arrow.
4. Pull off the bulb and replace it.
5. Insert the bulb socket.
6. Reattach the cover.
Xenon headlamps
Xenon headlamps
Because of the long life of these bulbs, the like‐
lihood of failure is very low. Switching the lamps
on and off frequently shortens their life.
If a xenon bulb fails, switch on the front fog lamps
and continue the trip with great care. Comply
with local regulations.
Do not perform work/bulb replacement on
xenon headlamps
Have any work on the xenon lighting system, in‐
cluding bulb replacement, performed only by a
service center.
Due to the high voltage present in the system,
there is the danger of fatal injuries if work is car‐
ried out improperly.◀
Parking lamps and roadside parking
lamps, daytime running lights
H8 bulb, 35 watt
1.
Switch off the lamps and take the remote
control out of the ignition lock.
2. Remove the high beam cover, refer to
page 247.
3. Turn the bulb by approx. 90˚, see arrow, and
pull it out.
4. Disconnect the plug, change the bulb and
reconnect the plug.
5. Insert the bulb and turn it until it stops.
6. Reattach the cover.
Seite 248
Mobility Replacing components
248
Online Edition for Part no. 01 40 2 914 595 - VI/12
Loading ...
Loading ...
Loading ...