Loading ...
Loading ...
Loading ...
English
41
SETTING DATE AND TIME
Set the current date and time so that the date and time you make a recording can be recorded correctly.
The following procedure can also be used to correct the date and time you have already set.
1Turn the DVD video camera/recorder on.
2Press the MENU button.
The menu screen will
appear.
3Use the joystick to choose
“Date Setup” and then
“Date Set”.
4Tilt the joystick to right.
The figure for the month
will be selected.
[The digit that is
highlighted first
depends on the date
display format (set up in Date Mode): The digit
on the left end of the date display will be first
highlighted.]
Note:
After setting the figure for the month, tilt the joystick to
right to select the digit to be set. If you press the
A
button after selecting the figure for the month, the
screen for verifying the set date will appear instead of
screen for setting day, year or time.
5Tilt the joystick to left or
right to select the digit
you want to set in
sequence.
Tilt the joystick up or
down to select the
number for current date/time, and then repeat
step 5 to set the current date and time.
Note:
To stop date/time setting midway, press the C button.
6After setting the current
date and time, press the
A button.
The screen for verifying
the set date will appear.
7If the displayed date and time are correct, use
the joystick to choose “YES”, and then press the
A button.
The date and time will be set, and the DVD
video camera/recorder will enter the recording
pause status.
Choosing “NO” will restore the menu screen.
Note:
This DVD video camera/recorder incorporates a
rechargeable battery to store the date and time in memory.
If this built-in battery is exhausted, the date and time will
be reset. To prevent this, connect the AC adapter/charger
to DVD video camera/recorder every 3 months, and leave
them for at least 24 hours with the DVD video camera/
recorder turned off: The built-in battery will be charged.
Tilt up/down and to left/
right to select, and then
press
A to designate.
Ca
m
era Functi ons Setup
Progra
m
AE : Auto
W
hi te Bal. : Auto
Dig. Z
oom
: 40x
M
IC.Fi l ter :
O
ff
16:9
:
O
ff
EIS :
O
n
ENTER RETURN
RAM
Da te Se t up
RAM
Date Mode
Da t e Se t 1/ 1/ 2004
ENTER RETURN
0:00
RAM
Date Mode
ENTER RETURN
Da t e Se t 1/ 1/ 2004
0:00
Da te Se t up
RAM
8:00
Date Mode
ENTER RETURN
Da t e Se t 30/
9/2004
Da te Se t up
ENTER
RAM
30/ 9 /2004 8:00
Date set up?
YES NO
Da te Se t
Loading ...
Loading ...
Loading ...