Loading ...
Loading ...
Loading ...
premature wear and aging of various
components. Model S constantly monitors
powertrain fatigue and damage, and notifies
you if vehicle components need to be
serviced.
Warning: Use Launch Mode only in
appropriate locations where there is no
cross trac or pedestrians present.
Launch Mode is designed for use on
closed circuit driving courses. It is the
driver’s responsibility to ensure that
driving style and acceleration do not
endanger or inconvenience other road
users.
To Activate Launch Mode
Before activating Launch Mode, it is
recommended that the brakes are slightly
warm by driving for a few minutes and using
the brakes a few times.
1. Set the acceleration level to Insane or
Ludicrous and enable Max Battery Power
(described above).
Note: You can use Launch Mode
immediately after enabling Max Battery
Power. There is no need to wait until Max
Battery Power is in its READY state.
2. With Model S shifted into Drive and at a
complete stop with the steering wheel
straight, fully press the brake pedal with
your left foot.
3. While still pressing the brake with your left
foot, fully press the accelerator pedal with
your right foot, then release the
accelerator pedal. The instrument panel
displays a message indicating that Launch
Mode is enabled.
4. Within eight seconds, fully press the
accelerator pedal a second time to pre-
load motor torque, then within four
seconds, release the brake.
When you release the brake, Model S launches
forward.
Note: Launch Mode is not available if Slip Start
has been enabled (i.e. wheels can spin). See
Traction Control on page 63.
Note: Launch Mode is available only if the
ambient temperature is 3° C or warmer.
Acceleration Modes
68 Model S Owner's Manual
Loading ...
Loading ...
Loading ...