Loading ...
Loading ...
Loading ...
Operations
English 29
In Setting mode
1. Press and hold Delay Start and Sanitize simultaneously for 3 seconds to enter Setting
mode.
2. Keep pressing Sanitize until ‘A1’ or ‘A0’ is displayed. Select one between ‘A1’ (enabled)
and ‘A0’ (disabled). For better results, select ‘A1’ (default).
3. Press Delay Start to conrm your changes.
On the control panel
• To activate the Auto Release™ Dry function, press and hold Lower Rack and Hi-Temp
Wash simultaneously for 3 seconds. ‘A1’ will be displayed.
• To deactivate, press and hold the buttons again for 3 seconds. ‘A0’ will be displayed.
NOTE
Once the door opens to let steams out, it cannot be closed manually for the next
2 minutes. This is normal and not a product defect.
Delay Start
You can delay the cycle starting time up to 24 hours in 1-hour increments. To increase
the delay time, press Delay Start ( ). The hour displayed indicates the time at which the
cycle will start.
1. Open the door, and then load the dishwasher.
2. Press Delay Start ( ), and then press or hold Delay Start ( ) to change the time in
1-hour increments.
3. Close the door, and then press START.
NOTE
To change the delay time once the dishwasher has started, press POWER and restart the
dishwasher.
Control Lock
To prevent children from playing with the dishwasher, Control Lock locks all button
controls except for POWER.
• To activate Control Lock, press and hold Sanitize for 3 seconds. With Control Lock
activated, you cannot select a cycle or option, or start an operation.
• To deactivate Control Lock, press and hold Sanitize again for 3 seconds
• Control Lock remains active after the dishwasher restarts. To cancel Control Lock, you
must deactivate it rst.
• To add detergent or more items while Control Lock is active, you must deactivate
Control Lock rst.
DW9900M_DD68-00196B-01_EN.indd 29 2017-09-04 12:05:21
Loading ...
Loading ...
Loading ...