Loading ...
Loading ...
Loading ...
English
109
Problem (Recording) Solution
Troubleshooting (continued)
This happens if you try to copy DVDs or video tapes
that have been copy-protected. Even though the picture
on the TV is  ne, the recording on the recordable DVD
is faulty. This interference is unavoidable with copy-
protected DVDs or video tapes.
The recordable DVD has a limited recording lifetime,
use a new disc for recording.
If a recording is too short, it is possible that a DVD
player cannot detect it.
You have to  nalise the DVD±R. See ‘Finalising the
DVD±R for playback’ for details.
You have to make the DVD±RW compatible. See
‘Making the edited DVD±RW compatible’ for details.
You have to re-format the DVD±RW.
1) Press OPEN CLOSE on this recorder to open the disc
tray.
2) Insert the disc but do not close the tray.
3) Hold down button number {0} on the remote control
until the disc tray closes.
4) Start recording on the DVD±RW before you remove
it from the disc tray.
Some PC/DVD players do not support the UDF1.50  le
system used on the disc. Any PC installed with
Windows XP or higher is able to play this DVD.
Turn off the recorder to standby mode for at least 24
hours. It enables downloading of TV listings data.
Make sure that no timer recording is programmed
during this timing, as it will interrupt the EPG
downloading.
You need to map the channels manually.
1) Press GUIDE Plus+ on your remote control.
2) Move the cursor to the options bar on top.
3) Move the cursor until { SETUP } is highlighted.
4) Move the cursor down to select { Channel Mapping },
then press OK.
5) Assign the correct programme number to the TV
channel.
Picture is fuzzy and
brightness varies when
played back your recording.
DVD±R/±RW recorded on
this DVD recorder cannot
be played back on other
DVD players.
The DVD±RW cannot be
used for recording on this
recorder. Even though it
has been formatted using
the PC drive.
Music/photo/DivX  les
copied from the hard disk/
USB device to a recordable
DVD cannot be played
back on other DVD
players.
EPG (GUIDE Plus+) data is
not available.
The channels are mapped
wrongly in the EPG
(Electronic Program
Guide).
Loading ...
Loading ...
Loading ...