Loading ...
Loading ...
Loading ...
142
– If ingredients stick to the sides of the jug when mixing, stop the
appliance. Remove the blender jug, and push the food down onto the
blades using a spatula and put your blender jug back to continue your
preparation.
– Never fill the blender jug with boiling liquid.
– Never run the blender empty.
– Always use the blender jug with its lid.
– Never remove the lid before the blades have stopped completely.
– Always pour liquid ingredients into the blender jug first before
adding solid ingredients.
2.3 - DISMANTLING THE ACCESSORY
• Wait until the device has completely stopped and unplug it. Remove
the mixing bowl by unlocking it. Put the trap (a6) back in place on the
outlet (a5).
3 - GRATING/SLICING (DEPENDING ON MODEL)
ACCESSORIES USED:
– Vegetable slicer attachment (e1)
– Drum body (e2) + pusher (e3)
– Drums (depending on model)
– Drum retaining collar (e4)
3.1 - ASSEMBLING THE ACCESSORIES (DIAGRAMS 3)
• Turn the button (a3) to unlock the multifunctional head (a4) and lift
until it stops.
• Fit the attachment (e1) under the multi-function head (a4): align the left-
hand mark on the attachment (e1) with the mark on the multi-function
head (a4), and turn until the right-hand mark on the attachment (e1) is
aligned with that of the multi-function head (a4).
• Insert the chosen drum into the body, and make sure that it is fully
engaged in the body. Fit the drum retaining collar (e4).
• Facing the attachment (e) outlet, insert the drum body (e2) inclined
to the right, aligning the two bayonets in the drum body with the two
notches in the attachment. Push it home. If you find it difficult to fit it,
slightly turn the shaft (e2.1) of the drum body and push it again. Turn
the drum body anti-clockwise until it latches with the feed tube in the
Loading ...
Loading ...
Loading ...