Phantom 4 RTK User Manual

Loading ...

Camera Settings: Includes photo ratio, white balance, metering mode, gimbal angle, shutter priority

and distortion correction.

The default metering mode is average metering as it best serves mapping applications.

If distortion correction is enabled, the image quality may be lower due to processing. It is

recommended to disable this option when original images are need for post processing.

Advanced Settings: Includes horizontal overlapping rate, vertical overlapping rate and margin. The vertical

overlapping rate indicates the overlapping rate of two pictures captured consecutively along the same

path. The horizontal overlapping rate indicates the overlapping rate of two pictures on two parallel paths.

8. Map Zoom In/Out

: Tap to show the slider, and then slide it to zoom in or out.

9. Route Direction

: The system automatically produces ight routes after adding edge points and setting parameters.

Tap and drag this icon to adjust the ight direction of the produced route. Tap the icon for ne tuning in

the pop-up menu.

The descriptions above use Photogrammetry operations as an example. Operations such as Terrain

Awareness Mode, Block Segmentation and others have similar interfaces with Photogrammetry operations.

For 3D Photogrammetry (Multi-oriented) operations, click the numbers 1 to 5 in the map view to preview

each flight path. 1 refers to the nadir view flight path, and 2 to 5 refer to the four oblique flight paths

respectively.

Waypoint Flight

1. Planning Information

Shows the planned route length, estimated ight time, and microSD card capacity.

2. Map Mode

: Tap to switch among Standard, Satellite, or Night modes.

3. Location Follow

: Tap to center the map around the aircraft’s location at all times, following its location update.

99%

Route Settings Save

93 m

RTK

D 10.0M/SH 10.0M

V.S: 0.0M/S H.S: 3.3M/S

In Flight (RTK)

Route Length

Estimated Flight Time SD Card

Loading ...

Dji Phantom 4 RTK The Drone