Loading ...
Loading ...
Loading ...
21
TROUBLESHOOTING
Fault/malfunction Cause Remedy
Product does not
Battery pack not properly attached Attach properly
start
Remove and charge the battery
pack
Battery pack damaged Contact our service center
Other electrical defect to the
product
Contact our service center
Product does not reach full
power
Battery pack capacity too low
Remove and charge the battery
pack
Air vents are blocked Clean the air vents
Unsatisfactory result
Accessory is worn Replace with a new one
Accessory not suitable for intended
operation
Use suitable accessory
Product suddenly stops
Product overloaded
Remove the product from the
workpiece and switch it on again
Battery pack discharged
Remove and charge the battery
pack
Battery pack too hot
Remove the battery pack and let it
cool down
Excessive vibration or
noise
Accessory is dull / damaged Replace with a new one
Bolts/nuts are loose Tighten bolts/nuts
Loading ...
Loading ...