Loading ...
Loading ...
Loading ...
15
Fig.21
2. Grasp the front and rear handles rmly, using
both hands.
3. Press down the lock-off button rst
①
, then
squeeze the trigger switch to start
②
. (Fig. 22)
1
2
Fig.22
Release the lockoff button and continue to
squeeze the trigger for continued operation.
WARNING:
Do not attempt to start the saw
when the saw chain is in a cut.
To Stop
1. Release the trigger switch.
2. Push the chain kickback brake handle
forward to the brake position to engage the
chain brake (Fig. 21).
Fig.21
WARNING:
Always remove the battery
pack from the chain saw during work
breaks and after nishing work.
Indicator panel
The indicator panel will be light ON while you
squeeze the trigger switch.
Status meaning as shown in Fig. 23
Fig.23
Proper Grip On Handles
- Wear non-slip gloves for maximum grip and
protection.
- With the saw on a rm, at surface, hold the
saw rmly with both hands.
- Always grasp the front handle with the left
hand and the rear handle with the right.
- The ngers should encircle the handle, with
the thumb wrapped under the front handle.
WARNING:
Never use a left-handed
(cross-handed) grip, or any stance which
would place your body or arm across the
chain line.
Proper Cutting Stance
- Both feet should be on solid ground, with
weight evenly spread between them.
- The left arm should be straight, with the
elbow locked. This helps to withstand the
forces generated by kickback.
- Your body should always be to the left of the
chain line.
Loading ...
Loading ...
Loading ...