Yard Force YF60vRX 60v Lithium-Ion 16” Chainsaw

User Manual - Page 13

For YF60vRX 60v Lithium-Ion 16” Chainsaw.

PDF File Manual, 23 pages, Download pdf file

Loading ...
Loading ...
Loading ...
13
0.08" (2 mm)
+
-
Fig.15
NOTE:
New chains tend to stretch; check chain
tension frequently and tension as required.
NOTE:
A chain tensioned while it is warm may
be too tight upon cooling. Check the cold tension
before next use.
Charging the battery pack
NOTE:
Remove the battery pack from the
charger after it has been fully charged.
NOTE:
Battery should be fully charged before
rst use.
NOTE:
Make sure the mains voltage is the
same as the rating label which is located on the
charger.
1. Connect the charger to a power supply. The
red LED will light up.
2. To insert the battery pack into the charger,
align the raised ribs of the battery pack with
the grooves of the charger then push it in.
(Fig. 17)
Fig.17
3. The green LED light of the charger will ash
continuously during normal charging.
4. After charging is complete, the charger light
will turn to a solid green light.
Power indicator (Fig. 18)
This Li-Ion battery pack is equipped with a power
indicator which is used to show the battery packs
remaining charge. Press the power indicator
button to check battery charge as below. The
LEDs will stay lit for approximately 4 seconds.
Fig.18
To obtain the best life from the battery
NOTE:
1. Never allow the battery to completely
discharge before recharging. The battery
pack should be placed on the charger
whenever the battery pack is noticeably
running down or the tool no longer performs
a task it previously performed.
2. Avoid conducting short charges. Make sure
that the battery is fully charged each time
by allowing the charger to complete its full
charging cycle.
3. Avoid allowing loose items like screws or
nails etc. to be stored with battery packs
as these or similar items can short battery
packs' life and cause a re or explosion.
4. Always unplug the charger when not in use
and store in a dry and secure place.
5. Avoid charging or storing your battery in
temperatures below 41°F and above 113°F.
6. After use, allow the battery pack to cool
down for approximately 30 minutes before
attempting to recharge.
Filling bar and chain lubricant oil (Fig. 16)
Fig.16
Loading ...
Loading ...
Loading ...