Loading ...
Loading ...
Loading ...
21
PROGRAM FOR AUTOMATIC SWITCHING OFF OF A COOKING ZONE
This function makes it possible to program a cooking time from 1 minute to 3 hours 59
minutes, in order to switch off one or more cooking zones automatically.
With the burner lit:
■ Select the cooking zone by pressing the related button (button 5, 6, 7, 8 or 9 in g. 8);
the associated indicator light will start blinking.
■ Press timer button or within approximately 10 seconds.
The timer display will show “0.06 ” ” if you press the button or “0.04 ” if you press
the button (each subsequent press increases or decreases the time by 1 minute).
■ Set the cooking time using the or timer buttons to increase or decrease the
time (if you select “0.00 ”, the timer will switch off automatically after 5 seconds, while
the cooking zone will remain active).
■ The countdown starts a few moments after the last selection was made.
The time can be changed at any time by selecting the related cooking zone button
(buttons 5, 6, 7, 8 or 9 in g. 8) and then using the or timer buttons; in this
case the countdown is interrupted and the timer changes the automatic switch-off time.
■ Programming of the cooking zone switch-off time has now been completed.
■ You can also program the other cooking zones if necessary by repeating the above
steps. In this case, the timer shows the remaining time of the last cooking zone selected
with the associated indicator light blinking (the indicator lights of the other programmed
zones will remain steady on).
■ When the countdown ends the cooking zone will switch off automatically, a beep signal
will sound, the word “
End ” will appear on the timer display, and the indicator light of
the button for the cooking zone that has just switched off will blink.
Turn the knob of the burner that has just been switched off to the “ ” position to mute
the audible signal (beep); if this step is omitted the touch-control panel will remain
disabled.
If there are several zones programmed for automatic switch-off, after having set the
knob of the zone that has just switched off to the “ ” position, the timer will show
the remaining time of the next programmed zone to be switched off and the related
indicator light will blink. If the knob is not returned to the “ ” position the indicator
light for the rst zone to be switched off will continue to blink while the other indicator
lights all remain steady on.
Note: The automatic cooking end program can be cancelled at any time by returning the timer
to “
0.00 ” (after having selected the button of the cooking zone in question); alternatively, the
burner can be turned off manually (by turning the control knob to the “
” position).
Loading ...
Loading ...
Loading ...