Loading ...
Loading ...
Loading ...
10
30 mm min.
40 mm max.
S
A
F
G
30 mm min.
40 mm max.
40 mm min.
40 mm min.
S
A
R
G
30 mm min.
40 mm max.
S
A
F
G
30 mm min.
40 mm max.
40 mm min.
40 mm min.
S
A
R
G
Rear Fixing Brackets Front Fixing Brackets
Figure 3dFigure 3c
FASTENING THE COOKTOP
Each cooktop is provided with an installation kit including
brackets and screws for fastening the cooktop to benches
from 30 to 40mm thick.
The kit includes four “F” type brackets (for the front of
the cooktop), three “R” type brackets (for the rear of the
cooktop) and seven self-threading screws “S”.
■ Cut the unit according to the dimensions in g. 3a.
■ Stretch gasket “G” over the edge of the hole made,
being careful to overlay the junction edges (fig. 3b).
■ Fasten the brackets “F” and “R” to the appropriate
socket holes, without tightening the screws “S” for
the moment. Make sure that the tabs are mounted
correctly, as shown (gs. 3c, 3d). Rotate the tabs so
that the cooktop can be put into the cutout.
■ Put the cooktop into the cutout and position it
correctly.
■ Put the brackets “F” and “R” into place; tooth “A” of
the brackets should go into the hole (gs. 3c, 3d).
■ Tighten screws “S” until the cooktop is completely
secured to the bench.
■ Using a sharp cutter or trimmer knife, trim the excess
sealing material around the edge of the cooktop.
Take care not to damage the workbench.
F
F
F
F
R
R
R
F
F
R
R
Figure 3a
G
G1
G2
Figure 3b
Loading ...
Loading ...
Loading ...