Loading ...
Loading ...
Loading ...
18
USING GAS BURNERS
■ Check that the electricity is switched on to allow spark ignition.
■ Make sure that all controls are turned to “ ” (burner off).
■ The gas ow to the burner is controlled by a tap incorporating a safety cut-off valve.
■ You control the ow by turning the knob indicator to line up with the following symbols:
– Symbol : tap closed (burner off)
– Symbol : High (maximum)
– Symbol : Low (minimum)
■ You can control the temperature by the knob to “High” (maximum) from “Low” “Minimum”.
■ To switch off, turn the knob clockwise until you hear the safety click.
■ Note that, if you are using a burner at the minimum setting, you turn the knob clockwise
past the maximum setting before reaching the off position.
■ Whenever lighting any of the burners produces an abnormal ame, switch that burner
off and relight using the minimum setting.
■ If after relighting the burner, the ame is still abnormal, turn the burner off and contact
our Customer Service Centre to obtain the nearest authorized Delonghi Service Agent.
■ In the case of a mains failure light the burner with a match or lighted taper.
■ Note: When the cooker top is not being used, set the gas knobs to their closed
positions and also close the cock valve on the gas bottle or the main gas supply line.
Figure 9
IMPORTANT NOTE:
The hob can function correctly and
safely also without an electrical
supply. In this case the indicator
lights, audible signals (beeps),
automatic re-lighting and all functions
available via the touch-controls will
be inactive.
Caution!
Do not cover the hob with aluminium
foils.
Loading ...
Loading ...
Loading ...