Loading ...
Loading ...
Loading ...
5
Installation Instructions
Parts List
- Grates (2)
- Standard burner caps
(3 brass, 3 porcelain)*
- Standard burner rings (3)
- SimmerSear burner caps
(1 brass, 1 porcelain)*
- SimmerSear burner ring (1)
- SimmerSear burner head (1)
- GlideRack™ oven racks (2)
- Standard rack (1)
- 5 Knobs (2 MAX GRIDDLE,
2 Standard, 1 Oven)
- Anti-tip bracket with screws
and anchors
- Griddle (1)
- Wok ring (1)
- Broiler pan/grill (1)
- Stainless steel cleaner (1)
- Literature kit (1)
*The range comes with two styles of burner caps (brass and
porcelain) to suit owner preference. (Brass burner caps discolor
with use; this does not affect function.)
Replacing the Backguard
If a different backguard will be used, please assemble it before
pushing the range into position.
Model No. Item
APB30GLP 1.5-inch high Backguard (Low Profile)
APB30D9 9-inch high Backguard
Downdraft Installation
If installing a downdraft, install it before moving the range into
position. An additional trim kit must be used to unify the range,
downdraft, and backguard.
Model No. Item
ERV3015 Downdraft
ATKERV-RP30 Trim Kit
Installing Rear Trim
If installing the range in the self-rimming configuration, or if the
range will be used with a downdraft, install the rear trim piece
first. Remove the existing screws that hold the backguard in place
and use them to attach the trim piece.
Installing the Anti-Tip Bracket
The anti-tip bracket (see the parts box), can be installed one of
two ways:
• Floor mounting (preferred).
• Wall mounting (if floor mounting is unsuitable). If the front
panel of the range (excluding bull nose) is more than 27
inches (68.6 cm) from the back wall, or if the flooring is too
thick (see Installing the Anti-Tip Bracket on the Wall), use
the wall mounting method.
Floor-Mounting the Anti-Tip Bracket
WARNING
The anti-tip bracket must be attached as instructed to the concrete
slab or wood sub-floor under any flooring type (including cement
board). Do not attach the anti-tip bracket directly to floor coverings
Use the anchors and 4 of the Phillips-head screws when attaching
the anti-tip bracket to a concrete sub-floor. Do not use anchors
when attaching the bracket to a wooden sub-floor.
• Plastic anchors (4)
• 1-in. #8 (4)
• 1 1/4-in. #8 (4)
• 1 3/4-in. #12 (4)
Sub-floor
Anti-tip
Bracket
Floor
surface
Concrete anchors shown.
Do not use anchors on a
wooden sub-floor.
Preparing for Installation
WARNING
• If the home utilities do not meet product specifications, delay
the installation until the proper services are installed by
qualified personnel.
• Install the anti-tip bracket before you install the range.
IMPORTANT: Within the Commonwealth of Massachusetts, this
appliance must be installed by a licensed plumber or gas fitter.
Unpacking the Range
Unpack the parts box, and verify that all required parts are
present. If anything is absent or damaged, contact your dealer
immediately. Do not install a damaged or incomplete range.
Loading ...
Loading ...
Loading ...