Loading ...
Loading ...
Loading ...
9
Installation Instructions
Reinstalling the Oven Door
WARNING
To avoid personal injury or property damage:
• Make sure that the notch on the bottom of each oven door
hinge locks inside the receptacle before opening the door.
• Lock the hinges by flipping the top of the receptacle latch
toward the door immediately after the door is installed.
The mating mechanism that holds the door in place is the door
hinge with a notch that locks into the oven receptacle. Ensure the
notches seat inside the receptacle.
1. Grasping each side of the oven door below the handle, tilt the
top out about 15° from vertical.
2. Slide the door hinges into the oven receptacles.
3. Pushing on the bottom corner of the door, insert the hinges so
the notch on the bottom of each hinge seats in the receptacle.
4. Lay the door flat open.
5. With a slotted screwdriver, flip both hinge tops outward.
6. Slowly close and open the door to verify it is properly latched.
7. Remove all packaging from the oven chamber(s).
Door Installation and Hinge Details
Notch on bottom
of hinge
Oven Hinge
Receptacle
Door Hinge
Installing the Burner Knobs
WARNING
Incorrectly installing the burner-control knobs may lead to griddle
damage from excessive heat. The knobs for the right-side
burners have the MAX GRIDDLE setting.
NOTE: A D-shaped key on the back of each knob mates with the
D-shaped valve stem to ensure proper installation and function
The range has three types of burner-control knobs:
B
A
C
C
B
BROIL500°400°300°200 °WARM CLEAN
Oven / Broil Knob A
Max Griddle Burner Knob Icons B
Left Burner Knob Icons C
Loading ...
Loading ...
Loading ...