Loading ...
Loading ...
Loading ...
86 Servicing Your Honda
Piston/Piston Rings/Piston Pin
12. Connect the breather tube A (22).
Connect the IAT sensor connector (23).
13. Secure the breather tube B (24) with the clip
(25).
14. Connect the radiator hose (26) to the water
hose joint (27) of the cylinder head.
15. Tighten the radiator hose clamp screw (28) as
illustrated below.
16. Connect the ECT sensor connector (29).
17. Install the shims, valve lifters, camshaft and
camshaft holder (page 73).
18. Install the crankshaft hole cap (page 75).
19. Install the cylinder head cover (page 76).
20. Install the spark plug (page 67).
21. Install the exhaust pipe (page 111).
22. Install the subframe (page 38) and left and
right mufflers (page 109).
23. Install the fuel tank and seat (pages 34, 36).
24. Fill and bleed the cooling system (page 155).
Check for the following:
– compression leaks
– abnormal engine noise
– secondary air leaks
– exhaust gas leaks
– coolant leaks
– oil leaks
(22) breather tube A
(23) IAT sensor connector
(24) breather tube B
(25) clip
(26) radiator hose
(27) water hose joint
(23)
(22)
(24)
(25)
(26)
(27)
(28) radiator hose clamp screw
(29) ECT sensor connector
(28)
0 – 0.04 in
(0 – 1.0 mm)
(29)
Loading ...
Loading ...
Loading ...