Loading ...
Loading ...
Loading ...
32
11. Compruebe que el suministro eléctrico corresponda al que
figura en la placa de especificaciones. Si el producto se conecta
a un suministro eléctrico que no sea el indicado en la placa de
especificaciones, este puede sufrir daños permanentes o funcionar
de manera inadecuada o insegura.
12. El producto debe conectarse a tierra.
LEA Y GUARDE
ESTAS INSTRUCCIONES
GARANTÍA: Este aparato tiene una garantía limitada de 5 años que
cubre el uso razonable. Si un componente falla dentro del período
de garantía de 5 años, será reemplazado, sujeto a inspección.
US
IMPORTANT SAFETY INSTRUCTIONS
WHEN INSTALLING OR USING AN ELECTRICAL APPLIANCE
BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
WARNING
Risk of electric shock! If casing is removed or handled improperly the
internal components of the appliance may cause harm or become
permanently damaged. Do not expose the internal mechanisms/
components of this appliance to moisture.
1. All electrical installation and repair work should be carried out by a
qualified electrician or Dyson Field Service Engineer in accordance
with current local codes or regulations.
2. Do not connect any DALI terminals to mains power. DALI wires are
NOT SELV and should never be considered touch safe. Functional
level of isolation or better is required between DALI wires and
mains cabling.
3. The appliance is designed for dry, internal location only. Operating
environment range 0°C (32°F) to 40°C (104°F) and 10-95% RH non-
condensing. This appliance should not be used in or near the vicinity
of water or otherwise in a wet location.
4. Consult local and national accessibility codes and regulations for
relevant installation guidelines. This appliance should be installed
with appropriate fixings for the installation environment. Conformity
and compliance is the responsibility of the installer. Dyson is not
responsible for any damage resulting from improper installation
or failure to conform to applicable local and national codes
and regulations.
5. If any part of the appliance is not working as it should, has received
a sharp blow, has been dropped, damaged, left outdoors, or been in
contact with water, do not use and contact the Dyson Helpline.
6. Do not look directly into the light source.
7. Do not install or use with a damaged suspension cable. If the
suspension cable supplied is damaged it must be replaced by Dyson,
its service agent or similiarly qualified person in order to avoid
a hazard.
8. This appliance is only compatible with DALI compliant dimmer
products. This product should not be used with noncompliant
products. Dyson is not responsible for any damage resulting from the
use of this applications in conjunction with noncompliant products.
9. Use a micro fiber cloth or solvent and moisture free compressed air
canister to clean the appliance and ensure the appliance is turned off.
10. Ensure no pipe work (gas, water, air) or electrical cables, wires or
ductwork are located directly behind the drilling/mounting area.
Loading ...
Loading ...
Loading ...