Loading ...
Loading ...
Loading ...
5
5. Select Proper Mode
Press the MODE button to switch the working mode between DEHU (DEHUMIDIFY) mode, DRY
(Laundry Dry) mode, and CONT (Continuous) mode. The corresponding indicator will illuminate
when that mode has been selected.
·DEHU Mode: HUM. Button and SPEED button are available to use.
·DRY Mode: Both HUM. Button and SPEED button are disabled.
·CONT Mode: HUM. Button is disabled. SPEED button is available to use.
(1) DEHU (DEHUMIDIFY) Mode
In the DEHU (DEHUMIDIFY) mode, the dehumidifier will automatically stop and restart based on the
humidity setting, which is called Humidstat Mode, hence maintaining the room humidity within the
range of ±3% of the set point.
For example, the set humidity is 50%, the dehumidifier will automatically stop working when the
room humidity reaches 47%, and then automatically restart when the room humidity raises up to
53%.
NOTE:
· When the set humidity level is not at least 3% lower than the room humidity level, the dehumidifier won’t start,
and DH icon will flash.
· When the room humidity level has been dropped down to the set-point, the dehumidifier will auto stop
dehumidifying and the LCD will flash.
· If you set the target humidity at 30%, the dehumidifier will run continuously until the water bucket is full.
To run the dehumidifier in the normal DEHUMIDIFY mode:
· Select DEHU (DEHUMIDIFY) Mode: Press the MODE button until you see the “DEHU” indicator
light up on the display.
· Check the Room Humidity: Typically, the digital number on the display is the humidity readout of
the inlet air, which is similar to the room humidity level.
· Set Your Desired Humidity
1 After selecting DEHU (DEHUMIDIFY) mode, press the HUM. button once, the digital number
on the LCD will turn to display the previous humidity set-point and flash.
2
Press the HUM. button repeatedly to adjust the set-point of humidity level between
30%-80% in 5% increments.
Loading ...
Loading ...
Loading ...