Loading ...
Loading ...
Loading ...
9
(2) Continuous Drain by Gravity
Water can be automatically be emptied into a floor drain by attaching the included drain hose.
To Achieve Continuous Drain by Gravity:
· Remove the drain outlet cover;
· Remove the black rubber stopper from the drain outlet;
· Attach one end of the drain hose to the drain outlet;
· Direct the other end of the drain hose down to a suitable drainage facility, like a floor drain. The
drainage facility should be lower than the drain outlet of the dehumidifier.
Note:
- Make sure the connection is tight and there is no leaking.
- Be sure to run the water hose sloping downward to let the water flow out smoothly. No kinks or bent.
- To improve gravity draining, you can raise the dehumidifier onto another higher and flat surface, like a table.
- If the condensation water would be drained out to an external container via the hose, be sure NOT to submerge
the other end of the hose into the drained out water.
- It is recommended to use a short hose. If the drain hose is too long, water may not drain completely, which can
lead to stagnant water and mildew build up inside the hose.
- When the continuous drain feature is not being used, remove the drain hose from the outlet and put the drain
outlet cover on.
Loading ...
Loading ...
Loading ...