Loading ...
Loading ...
Loading ...
6
SETTING UP YOUR SLENDERTONE COREFIT
Step 1 - Charge the battery.
We recommend plugging your charging cable into a USB port
on your computer or other low-energy device. If necessary,
only use a certified wall charger (e.g. UL/ETL) - Fig. a. Only
use the charging cable that came with your device. It’ll take
up to three hours to fully charge the battery. Your controller is
fully charged when you hear a beep and the battery icon on
the display is flashing with all three bars full.
N
OTES: Do not leave your controller connected to the charger when the battery is fully charged.
If the controller feels warm to the touch after charging, it should be allowed to cool down before use.
Step 2 – Place the GelPads on the belt.
i) Remove the three adhesive GelPads from their pack. There is a large,
square GelPad and two smaller oval GelPads. One side of each GelPad
has a grid pattern while the other side is black.
ii) Position the belt on a flat surface with the three metal studs facing upwards.
Remove the plastic cover from the grid pattern side of the square
GelPad
and place the
GelPad
grid pattern side down within the blue square to
cover the central metal stud. Press the edges of the
GelPad
firmly onto the belt.
(iii) Then remove the plastic covers from the grid pattern side of the two oval
GelPads
and place them grid pattern side down either side of the square
GelPad
(Fig. b) in the positions best suited to your waist size. Press the
edges of both
GelPads
firmly onto the belt.
NOTE: The location of the two smaller GelPads depends on your waist size. In the example below (Fig.c) we
show the smaller GelPads placed farthest from the large, square GelPad. This signifies the position for those
who have a larger waist (36"-42" / 91-107cm). Use the sizing guidelines below to help you choose which
is suitable for you.
I
MPORTANT: Ensure each GelPad is placed grid pattern side down and completely covering the metal studs.
Press the edges of all three pads firmly onto the belt before use.
N
OTE: The GelPads should be replaced every 25-30 sessions
Fig. a
Fig. b
Fig. c
Loading ...
Loading ...
Loading ...