Loading ...
Loading ...
Loading ...
Sewing the Various Built-in Decorative Patterns
D-4
Basic sewing
a
Select a decorative/character stitch pattern.
b
Attach monogramming foot “N”.
c
Place the fabric under the presser foot, pull the upper
thread out to the side, press (Needle position
button) to lower needle into fabric and then lower the
presser foot.
d
Press the “Start/Stop” button to begin sewing.
e
Press the “Start/Stop” button to stop sewing.
f
Press (Reverse stitch button) or (Reinforcement
stitch button) to sew reinforcement stitches.
CAUTION
• When sewing 7 mm satin stitch patterns and
the stitches are bunched, lengthen the stitch
length. If you continue sewing when the
stitches are bunched, the needle may bend or
break. For details on adjusting the stitch
length, refer to “Setting the stitch length” in
the “Basic operations” section.
Memo
• If the fabric is pulled or pushed during sewing, the
pattern may not turn out correctly. Also,
depending on the pattern, there may be
movement to the left and right as well as front and
back. Guide the fabric with your hand to keep the
fabric feeding straight and even during sewing.
Memo
• When sewing character stitches, the machine
automatically sews reinforcement stitches at the
beginning and end of each character.
• When sewing is completed, trim any excess
thread between letters.
Note
• When sewing some patterns, the needle will
temporarily pause in the raised position while the
fabric is fed due to the operation of the needle
bar separation mechanism which is used in this
machine. At such times, a clicking sound
different from the sound generated during
sewing will be heard. This sound is normal and is
not the sign of a malfunction.
Loading ...
Loading ...
Loading ...