Loading ...
Loading ...
Loading ...
86
Servicing Your Honda
Brakes
1.Pull the rubber dust cover (1) back.
2.Loosen the lock nut (2).
3.To position the front brake lever (3) farther
away from the handgrip, turn the adjuster (4)
clockwise.
To position the front brake lever closer to the
handgrip, turn the adjuster counterclockwise.
4.Tighten the lock nut. Return the dust cover to
its normal position.
5.Apply the brake, release it, then spin the
wheel and check that it rotates freely. Repeat
this procedure several times.
6.Check freeplay by pulling in slowly on the
front brake lever until the brake starts to
engage.
Freeplay: LESS THAN 13/16 in (20 mm)
If brake lever freeplay is not within this range,
see your dealer.
Front Brake Fluid Level
With the motorcycle in an upright position,
check the fluid level.
It should be above the LOWER level mark (1).
If the level is at or below the LOWER level
mark, check the brake pads for wear (page 88).
Fluid Level Inspection
RIGHT HANDLEBAR
(1) LOWER level mark
(1)
Loading ...
Loading ...
Loading ...