Loading ...
Loading ...
Loading ...
Servicing Your Honda
97
Wheels
Removal
1.Raise the rear wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the front of the
motorcycle with tie-down straps.
2.Unscrew the rear brake adjuster (1). Press the
rear brake pedal and disconnect the brake rod
(2) from the brake arm (3).
3.Loosen the lock nuts (4) and adjusting nuts
(5) on the chain adjuster on both sides.
4.Unscrew the rear axle nut (6). Pull the rear
axle shaft (7) out. Push the wheel forward
and derail the drive chain from the rear
sprocket. Remove the wheel.
Take care to prevent getting grease, oil, or dirt
on the brake shoe surfaces. This can cause poor
brake performance or rapid brake shoe wear
after reassembly.
Rear Wheel Removal
RIGHT REARLEFT REAR
(1)
(6)
(7) (4)(5) (3) (5)
(1) adjuster
(2) brake rod
(3) brake arm
(4) lock nuts
(5) adjusting nuts
(6) rear axle nut
(7) rear axle shaft
(4)
(2)
Loading ...
Loading ...
Loading ...