Loading ...
Loading ...
Loading ...
108
Servicing Your Honda
Drive Chain
3.Turn the adjusting nuts (3) on the right and
left chain adjusters an equal number of turns
to increase or decrease chain slack.
4.Align the notches (4) on the chain adjusters
with the graduated scales (5) on both sides of
the swingarm.
5.Torque the rear axle nut to:
46 lbf·ft (62 N·m , 6.3 kgf·m)
If a torque wrench is not used for this
installation, see your dealer as soon as possible
to verify proper assembly.
6.Tighten the adjusting nuts lightly. Then,
while holding the adjusting nuts with a
wrench, tighten the lock nuts.
7.Recheck drive chain slack.
8.Check rear brake pedal freeplay and adjust as
necessary (page 89). Freeplay is affected
when repositioning the rear wheel to adjust
drive chain slack.
Lubricate every 300 miles (500 km) or sooner
if chain appears dry.
Turn the rear wheel by hand. Saturate each
chain link joint so that the lubricant penetrates
between the link plates, pins, bushings, and
rollers.
Recommended lubricant:
Pro Honda HP Chain Lube or an equivalent
Lubrication
Loading ...
Loading ...
Loading ...