Loading ...
Loading ...
Loading ...
64
Servicing Your Honda
Engine Oil
1.Park your motorcycle on a firm, level
surface.
2.Clean around the oil fill cap/dipstick (1) and
nearby surfaces.
3.Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
4.Unscrew and remove the oil fill cap/dipstick.
Wipe it clean.
5.Hold the motorcycle upright.
6.Insert the oil fill cap/dipstick until it seats,
but do not screw it in.
7.Remove the oil fill cap/dipstick and check
the oil level.
• If the oil is at or near the upper level mark
(2), you do not have to add oil.
• If the oil is below or near the lower level
mark (3), add the recommended oil until it
reaches the upper level mark. (Do not
overfill.)
8.Insert the oil fill cap/dipstick and screw it in
tightly.
9.Check for oil leaks.
Checking & Adding Oil
(1)
(2)
(3)
(1) oil fill cap/dipstick
(2) upper level mark
(3) lower level mark
RIGHT SIDE
Loading ...
Loading ...
Loading ...