Loading ...
Loading ...
Loading ...
6-79
SYSTEM SETTINGS
Contents
WEB PAGE (ADMINISTRATOR)
Image Send Settings
Settings related to the image send function (scan, Internet fax, etc.) can be configured.
Operation Settings
The operation settings below apply to all image send functions. Select [System Settings] - [Image Send Settings] -
[Operation Settings] in the menu bar, and configure the settings.
Click the [Default Settings] tab and configure the
settings.
Default Display Settings
You can select one of 5 base screen types for the base screen
that appears when the [IMAGE SEND] key is pressed or when
the [CLEAR ALL] ( ) key is pressed in image send mode.
• Address Book
• Scan
• Internet Fax
•Fax
• Data Entry
Hold settings for a while after scanning has been completed
Use this setting to hold the settings after scanning is
completed (until Auto Clear Mode activates).
Switch Automatically to Copy Mode Screen
Enable this setting to have the screen automatically
switch to the copy mode screen if no action is taken in
the image send mode screen for 20 seconds.
Address Book Default Selection
One of the following screens can be specified for the
initial address book screen.
Tab Switch
• ABC
•Group
Address Type
•All
•E-mail
• FTP/Desktop
• Network Folder
• Internet Fax (Including Direct SMTP)
•Fax
•Group
Initial Resolution Setting
The following settings are available for the default
resolutions of scan, Internet fax, and fax mode.
Scan : 100X100 dpi, 200X200 dpi, 300X300 dpi,
400X400 dpi, 600X600 dpi
Internet fax : 200X100 dpi
200X200 dpi
200X400 dpi
400X400 dpi
600X600 dpi
Fax: Standard
Fine
Super Fine
Ultra Fine
Default Exposure Settings
This is used to set the default exposure settings for
scanning a document in image send mode. Select [Auto]
or [Manual]. When [Manual] is selected, the exposure
can be set to one of 5 levels.
For explanations of settings related to the fax function, see "FAX SYSTEM SETTINGS IN THE WEB PAGE" (page 6-106).
Default Settings
Half Tone
Half Tone
Loading ...
Loading ...
Loading ...