Loading ...
Loading ...
Loading ...
34
Insignia LED TV
www.insigniaproducts.com
Remote control
Audio noise.
• Other devices (for example, a surround sound receiver, external
speakers, fans, or hair dryers) may be interfering with your TV. Try
turning off one device at a time to determine which device is causing
interference. After you have determined which device is causing
interference, move it further from the TV to eliminate the interference.
No output from one of the speakers.
• Adjust the audio balance. See Adjusting sound settings on page 25.
• Test the TV’s speakers. See the TV Speaker Test option in Using the
HELP menu on page 31. If one or both of the speakers fails, try one of
the following solutions:
• Make sure that the audio cables are connected correctly and securely
to your TV.
• Make sure that the audio cables are connected to the AUDIO OUT
jacks on the connected device.
• Try a different set of audio cables.
• Make sure that the sound on the connected device is not muted.
• Try connecting the device to a different TV. If you do not hear sound,
the problem is with the device.
After images appear.
• Do not display a still image, such as a logo, game, or computer image,
for an extended period of time. This can cause a permanent after-image
to be burned into the screen. This type of damage is not covered by
your warranty.
PROBLEM SOLUTION
Remote control does not work.
• Make sure that the power cord is plugged into a working outlet.
• Make sure that there are no obstructions between the remote control
and the remote control sensor on the front of the TV.
• Point the remote control directly at the remote control sensor on your
TV.
• The supplied batteries are wrapped tightly in clear plastic. Make sure
that you have removed this plastic from the batteries.
• Make sure that the batteries are installed correctly.
• Replace dead batteries with new batteries.
Trouble programming your existing
universal remote control.
• See instructions in Programming universal remote controls on page 15.
• Codes are subject to change. For up-to-date codes, go to
Viewing universal remote control codes on page 15 or visit
www.insigniaproducts.com/remotecodes
• Replace dead batteries with new batteries.
• Refer to the User Guide that accompanied your universal remote
control and contact the manufacturer if problems persist.
PROBLEM SOLUTION
Loading ...
Loading ...
Loading ...