Loading ...
Loading ...
Loading ...
52
LAMP REPLACEMENT
3ˊRemove the screw securing the lamp cover with a screw driver as shown. Remove the lamp cover.
4ˊRemove the two screws that hold the lamp in place. Remove the lamp unit by holding the lamp handle,
then pulling outwards. Exercise caution when removing the lamp unit to avoid injury to your fingers.
5. Replace with the new lamp.
Place the removed lamp into the empty box of the replacement lamp. Do not touch the front glass of the
new lamp or receptacle. This may shorten the life of the lamp and reduce the picture quality.
gPush the lamp unit back to its original position.
gTighten the screws firmly on the lamp unit. If they are loose, the TV may not operate correctly.
SCREW
LAMP COVER
SCREW DRIVER
NOTE˖DO NOT PUT YOUR HAND IN THE LAMP STORAGE AREA AFTER THE LAMP UNIT IS
REM
O
VED
,
Y
OU
MAY
G
ET B
U
RNED.
HANDLE
REMOVE SCREWS
HANDLE
LAMP UNIT
HANDLE
LAMP UNIT
HANDLE
TIGHTEN THE SCREWS
NOTE˖THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. WAIT AT LEAST 30~45
MINUTES TO ALLOW THE LAMP TO COOL BEFORE PROCEEDING WITH LAMP REMOVAL.
Loading ...
Loading ...
Loading ...