Loading ...
Loading ...
Loading ...
7ENGLISH
2. QUICK OPERATION GUIDE
For detailed operating method read the
corresponding content on the instruction
manual.
1. Switch on the appliance.
Open the door, press the Power switch
button to switch on the appliance.
2. Fill the detergent dispenser.
Compartment A:
With each wash cycle.
Compartment B:
For programmes with pre-wash only
(Follow the user instructions!)
3. Check the rinse aid level.
Mechanical indicator C.
Electric indicator on control panel
(if provided).
C
A
B
4. Check the regeneration salt level.
(On models with water softener
system only.) Electric indicator on
control panel (if provided). If there
is no salt warning light in the control
panel (for some models), you can
estimatewhentollthesaltintothe
softener by the number of cycles the
dishwasher has run.
5. Load the baskets.
Scrape off any large amount of leftover
food. Soften remnants of burnt food in
pans, then load the baskets. Refer to
the dishwasher loading instructions.
6. Select a programme.
Press the programme button until
the selected programme lights up
(See the section entitled “Operation
instruction”)
7. Running the dishwasher.
Open the water tap and close the
door. The machine will start working
after about 10 seconds.
•Changing the programme.
1. A running cycle can only be
modiedifithasbeenrunning
for a short time. Otherwise the
detergent may have already been
released and the water already
drained. If this is the case, the
detergent dispenser must be
relled.
2. Open the door carelly, then press
the program button more than 3
seconds to cancel the running
programme.
3. Select a new programme.
4. Restart the dishwasher.
•Add forgotten dishes in the
dishwasher.
1. Open the door a little to stop the
dishwasher.
2. After the spray arm stop working,
you can open the door completely.
3. Add the forgotten dishes.
4. Close the door, the dishwasher
will start running again after 10
seconds.
WARNING!
Open the door carefully. Hot steam
may escape when the door is
opened!
• If switched off manually or lost
power supply, when switched on
again, please reselect the washing
cycle and operate the dishwasher
according to the original Power-on
state.
Loading ...
Loading ...
Loading ...