Loading ...
Loading ...
Loading ...
17ENGLISH
NOTE:
*EN 5 0242: This programme is
the test cycle. The information for
comparability test in accordance with
EN 50242, as follows:
• Capacity: 6 setting
• Rinse aid setting: 6
• The power consumption of off-
mode is 0.45W left-on mode is
0.49W
6.2 Turning On the Appliance
Starting a wash cycle...
• Draw out the basket(see the section
entitled “Loading the Dishwasher”).
• Pour in the detergent (see the section
entitled “Salt,
• Detergent and Rinse Aid
• Insert the plug into the socket. The
power supply is 220-240 VAC 50 Hz,
thespecicationofthesocketis10A
250 VAC.
• Make sure that the water supply is
turned on to full pressure.
• Press the program button, the wash
program will be changed as follows
direction: ECO-> Glass-> Party->
90min-> Intensive-> Normal;
• If a program is selected, the response
light will light. Then close the door, the
dishwasher begins to start.
NOTE:
When you open the door to pause
during washing, the program light
will stop blinking and the dishwasher
will mooing every minute unless you
close the door to start.
6.3 Change the Programme...
Premise: You can modify the washing
program, If the dishwasher just worked
for a short time. Otherwise, the detergent
may have already been released, and the
appliance may have already drained the
wash water. in this case, the detergent
dispensermustberelled(seethe
section entitled "Detergent").
Open the door a little to stop the
dishwasher, after the spray arm stop
working, you can open the door
completely. Press Program Button more
than three seconds the machine will be
in stand by state, then you can change
the program to the desired cycle setting
(see the section entitled " Starting a wash
program" ).
NOTE:
If you open the door during washing,
the machine will pause. When you
close the door the machine will keep
on working after 10 seconds.
In case of power failure, the selected
program will resume when power returns.
6.4 Forget to Add a Dish?
A forgotten dish can be added any time
before the detergent cup opens.
1. Open the door a little to stop the
washing.
2. After the spray arms stop working, you
can open the door completely.
3. Add forgotten dishes.
4. Close the door.
5. Press the Start/Pause button, the
dishwasher will run after 10 seconds.
6.5 At the end of the Wash
Cycle
Whentheworkingcyclehasnished,
the buzzer of dishwasher will sound
8 seconds, then stop. Turn off the
appliance using the ON/OFF button, shut
off the water supply and open the door
of the dishwasher. Wait a few minutes
before unloading the dishwasher to avoid
scald, the dishes and utensils are still hot
and more susceptible to breakage. They
will also dry better.
Loading ...
Loading ...
Loading ...