Loading ...
Loading ...
Loading ...
18 www.aeg.com
• Switch Off the Dishwasher
1. Switch off the dishwasher by
pressing the ON/OFF button.
2. Close the water tap!
• Open the door carefully.
Hot dishes are sensitive to knocks.
Open the dishwasher's door, leave it
ajar and allow cool down of the dishes
for 15 minutes. In this way they will be
cooler and the drying will be
improved.
Filter assembly
Thelterefcientlyremovesfood
particles from the wash water, allowing
it to be recycled during the cycle. For
bestperformanceandresults,thelter
assembly must be cleaned regularly. For
this reason, it is a good idea to remove
the larger food particles trapping in the
lteraftereachwashcyclebyrinsingthe
lterandcupunderrunningwater.To
removethelterassembly,pullthecup
handle in the upward direction.
WARNING!
The dishwasher must never be used
withoutthelters.
Improperreplacementofthelter
may reduce the performance level
of the appliance and damage dishes
and utensils.
Open
Step 1
:
Rotatethelterassembly
anticlockwise, then lift
it all up (A,B and C).
• Unloading the dishwasher
It is normal that the dishwasher is wet
inside.
WARNING!
It is dangerous to open the door
when washing, because the hot
water may scald you.
7. MAINTENANCE AND CLEANING
A
B
C
Step 2: Lift B and C up from A;
A
B
C
Step 3: Separate B and C.
NOTE:
Ifdoitfromstep1tostep3,thelter
system will be removed; while if do
itfromStep3toStep1,thelter
system will be installed.
Notes:
• Inspecttheltersforblockingafter
every time the dishwasher has been
used.
Loading ...
Loading ...
Loading ...