Loading ...
Loading ...
Loading ...
11ENGLISH
Step 2: select a certain level
of salt consumption
Press the Program button to select
the proper set according to your local
environment, the sets will change in the
following sequence: H4->H5->H6->H1-
>H2->H3;
Note:
1. German degree of measurement for
the water hardness
2. millimol, internationel unit for water
hardness
*) factory setting
Contact your local water board for
information on the hardness of your water
supply.
4.2 Fill the Rinse Aid
Dispenser
Rinse Aid Dispenser
Therinseaidisreleasedduringthenal
rinse to prevent water from forming droplets
on your dishes. That can leave spots and
streaks. It also improves drying by allowing
water to sheet off the dishes.
Your dishwasher is designed to use
liquid rinse aids. The rinse aid dispenser
is located inside the door next to the
detergentdispenser.Tollthedispenser,
open the cap and pour the rinse aid into
the dispenser until the level indicator turns
completely black. The volume of the rinse
aid container is about 110ml.
Step 3: Exit the status of salt
adjustment
Withoutanyoperationinveseconds,
the machine will exit from set mode, the
machine is into standby status
There are 6 levels of salt consumption in
all.It is recommended to select the level
according to below table:
Water Hardness level
Setting on the
water softener
Digital display
stalls
°dH
1)
mmol/l
2)
0-5 0-0.9 1 H1
6-11 1.0-2.0 2 H2
12-17 2.1-3.0 3 H3
18-22 3.1-4.0 4* H4
23-34 4.1-6.1 5 H5
35-45 6.2-8.0 6 H6
Function of Rinse Aid
Rinse aid is automatically added during
the last rinse, ensuring thorough rinsing,
and spot and streak free drying.
Attention!
Only use branded rinse aid for
dishwasher.Neverlltherinseaid
dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid
detergent). This would damage the
appliance.
When to Rell the Rinse Aid
Dispenser
If there is no rinse-aid warning light in the
control panel, you can judge the amount
of rinse-aid by the color of the optical
level indicator located next to the cap.
When the rinse-aid container is full,
the whole indicator will be dark. As the
rinse-aid diminishes, the size of the dark
dot decreases. You should never let the
rinse aid get below 1 / 4 full.
Loading ...
Loading ...
Loading ...