Loading ...
Loading ...
Loading ...
Rescanning a hard disk drive
Resetting the product (performing the Factory Reset function)
Displaying an alert message to notify the user of an operational error
Setting Network Standby mode (Network Standby)
When you set Network Standby mode to [On], you can start up or operate the HDD
AUDIO PLAYER via the network even when the HDD AUDIO PLAYER is in standby
mode.
1. Select [Settings] - [System Settings] in the Home screen.
2. Select [Network Standby].
3. Select [On].
Descriptions of menu settings
Selectable menu items are described below.
On:
The HDD AUDIO PLAYER is connected to the network at all times, even when the
unit is turned off. This allows you to start up or operate the HDD AUDIO PLAYER
from the HAP Music Transfer or HDD Audio Remote application. This mode also
reduces the startup time of the HDD AUDIO PLAYER.
Off:
The power consumption is lower than when Network Standby mode is set to [On], but
the startup time when the HDD AUDIO PLAYER is turned on is longer (factory
default setting).
Disconnected Wired Connection Detection and Wake on LAN settings
Setting Network Standby mode to [On] allows you to specify the following setting
options.
Disconnected Wired Connection Detection:
When [Disconnected Wired Connection Detection] is set to [On] (*), the HDD AUDIO
PLAYER will shift into normal standby mode from Network Standby mode in about 20
minutes if the LAN cable comes off from the HDD AUDIO PLAYER connected to a
Loading ...
Loading ...
Loading ...