Loading ...
Loading ...
Loading ...
33
GAS CONNECTION
This must be done in compliance with the regulations in force in the installation country. In
all cases, on the gas feed pipe provide a stopcock, a regulator or regulator release device
for propane gas. Only use valves, regulators ends and flexible tubes, regulators with the
official mark of the installation country.
Gas connection according to installation :
Natural Rigid, Flexible hose with mechanical fittings (1) - Soft rubber tube (3)
Butane Rigid, Flexible hose with mechanical fittings (1) - Soft rubber tube (2)
Propane Rigid, Flexible hose with mechanical fittings (1) - Soft rubber tube (2-3)
1 - provided the flexible hose can be inspected for its entire length.
2 - provided the soft rubber tube can be inspected for its entire length, its length does not
exceed 1.5 metres and it is fitted with suitable clamps at the ends.
1, 2 - soft tubes and flexible hoses with mechancial fittings must be arrange to be away
from any flames, and not deteriorated by the combustion gases, hot cooker parts or by
any spills of hot food.
THREE CONNECTION OPTIONS :
• RIGID PIPE CONNECTION
Connect directly to the manifold fittings.
• CONNECTION BY FLEXIBLE HOSE WITH MECHANICAL FITTINGS
We recommend this type of connection.
Screw the hose nuts directly onto the manifold fitting on the one hand and onto the stop
cock of the piping on the other hand.
• CONNECTION BY SOFT RUBBER
We do not recommend this type of connection.
To be reserved solely for old installations not enabling any other option.
Screw the compliant end piece
(2) Butane/Propane gas
Fit the soft tube to the end
piece on the one hand and
to the regulator or to the valve Natural gas
outlet on the other hand.
(2) In all cases, make sure the seal is fitted. Following the connection operations, test
the leak tightness using soapy water, testing by flame is strictly prohibited.
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...