Loading ...
Loading ...
Loading ...
8
Connect the MEN220
power cord to a live AC
outlet. Refer to information
on the back panel of your
MEN220 to determine the
correct voltage for your unit
Rear Panel Connections
IR INput for
connecting an
IR Receiver
DATA IN receives
operating data from a
McIntosh Preamplifier
or Control Center
POWER CONTROL IN receives
signals from a McIntosh component
(5-15 Volts ON, 0 Volts OFF).
POWER CONTROL OUT sends
out a (12 Volts ON) signal to an-
other McIntosh Component when
the MEN220 is On
UNBALanced AUDIO IN-
PUTS receive audio signals
from a Preamplifier or an
A/V Control Center
RS232 connector
for communica-
tions with an
external control
device
Connect the MEN220
Calibrated Microphone
with the supplied cable
BALanced AUDIO INPUTS
receive audio signals from a
Preamplifier or an A/V Con-
trol Center
Unbalanced OUTPUT 1
(HIGH) supplies Full Range or
High Frequency audio signals
to a Power Amplifier
Unbalanced OUTPUT 2
(LOW) supplies Full Range or
Low Frequency audio signals
to a Power Amplifier
Balanced OUTPUT 1 (HIGH)
supplies Full Range or High
Frequency audio signals to a
Power Amplifier
Balanced OUTPUT 2 (LOW)
supplies Full Range or Low
Frequency audio signals to a
Power Amplifier
Loading ...
Loading ...
Loading ...