Sony SVZ1311BGXXI User Manual

Loading ...

VAIO User Guide SVZ1311 Series Back | Back to Top

Troubleshooting

How to Use

Parts Description

Setup

Network / Internet

Connections

Settings

Playback

Backup / Recovery

Security

Other Operations

Notifications

Changing the Rapid Wake (Sleep Mode) Settings

You can change the Rapid Wake settings on VAIO Control Center.

Rapid Wake is enabled by default. With this function, you can keep your VAIO computer in

Sleep mode without risk of data loss because the computer enters Sleep mode after your

working data is saved on the built-in storage device.

In addition, you can conserve more battery power by reducing power consumption when the

computer is in Sleep mode.

1. Click

(Start), All Programs, and VAIO Control Center.

2. Click Power Management and Rapid Wake.

Click to select or clear the check box for Rapid Wake.

Select the check box to enable Rapid Wake or clear it to disable the function.

Note

With Rapid Wake disabled, your working data is not saved on the built-in storage device

when the computer enters Sleep mode. Therefore, if the computer is turned off during

Sleep mode because, for example, the battery pack runs out of power or the computer is

disconnected from an AC power source, the working data will be lost and cannot be

restored. To avoid data loss, be sure to save the data before the computer enters Sleep

mode. With Rapid Wake disabled, the power indicator light blinks slowly in orange during

Sleep mode, and the charge and power indicator lights blink simultaneously when the

battery pack runs out of power during Sleep mode.

If you use the Windows hard disk drive encryption feature, you need to configure other

settings. See Notes on Sleep Mode [Details] for more information.

While a docking station (supplied or optional) is connected to your VAIO computer,

Rapid Wake is disabled even when the check box for Rapid Wake is selected. To

enable Rapid Wake, disconnect the docking station from the computer.

Sony SVZ1311BGXXI