Loading ...
Loading ...
Loading ...
22
Electrical connection
Make certain the nominal a.c. power supply voltage corresponds to that indicated on the
identication data plate. To connect the appliance directly to the supply mains, a means for
disconnection having a contact separation in all poles that provide full disconnection under
overvoltage category III conditions, must be incorporated in the xing wiring, according with the
wiring rules.
The oven must be connected to an efcient earth system, as prescribed by national and/or local
statutory regulations.
The cable must be connected as prescribed by statutory regulations and respond to the
specications indicated on the Technical Data page.
The terminal box is located at the rear of the appliance. If a new cable is tted, route it through
the clamp and make the connections as shown in the diagram. The earth wire must be cut longer
than the other wires so that it will be the last to break off in the event of the cable being tugged.
Having made the connection, tighten the cable clamp and close the cover of the box.
Loading ...
Loading ...
Loading ...