Loading ...
Loading ...
Loading ...
13
Note
The home theater can store up to 40 radio •
stations.
Press
• to stop the installation.
AM and digital radio are not supported. •
If no stereo signal is detected, or if fewer than •
ve stations are found, you are prompted to
install the radio stations again.
For the best reception, place the antenna away
•
from the TV or other sources of radiation.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select
the audio output of the connected device (see
‘Connect audio from TV or other devices’ on
page 9).
Play from an MP3 player
Connect and play audio les from an MP3 player
or other external audio devices.
1 Connect the MP3 player to the home
theater.
2 Press AUDIO SOURCE repeatedly until
‘MP3 LINK’ appears on the display panel.
3 Press the buttons on the MP3 player to
select and play audio les.
Repeat play a specic section
Select sections of audio or video for repeat
playback.
1 During playback, press INFO.
2 Select [Repeat] > [Repeat AB] in the menu.
3 Press OK to mark the start point.
4 Press OK again to mark the end point.
Repeat play starts.
»
To cancel repeat A-B, press
• INFO,
select [Repeat] > [Off], then press
OK.
Note
Repeat play is only possible within a track/ •
chapter.
Play from radio
1 Check that the FM antenna is connected.
2 Press RADIO.
“
» AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
installed any radio stations. Press
.
3 Press the following buttons to control play:
Button Action
/
Selects a preset radio station.
/
Searches for a radio station.
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
PROGRAM Manual: Press once to access
program mode, press
/ to
assign a number to the radio
station, then press again to store
the radio station.
Automatic: Press and hold for
three seconds to reinstall radio
stations.
English
EN
Loading ...
Loading ...
Loading ...