Loading ...
Loading ...
Loading ...
Level 1 Level 2 Level 3 Level 4 Descriptions
Wi-Fi
Direct
Group Owner
- - Set your machine as the Group Owner.
Device Info. Device
Name
- View your machine's device name.
SSID
- View the Group Owner's SSID.
When the machine is not connected, the LCD
displays Not Connected.
IP Address
- View your machine's current IP Address.
Status Info. Status
- View the current Wi-Fi Direct network status.
Signal
- View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicates a strong signal.
Channel
- View the current Wi-Fi Direct network channel.
Speed
- View the current Wi-Fi Direct network speed.
I/F Enable
- - Turn the Wi-Fi Direct connection on or off.
Network
Reset
- - - Restore all network settings back to the factory
settings.
For wireless network models
Level 1
Level 2 Level 3 Level 4 Descriptions
WLAN TCP/IP Boot
Method
- Select the Boot method that best suits your needs.
IP Address
- Enter the IP address.
Subnet
Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(Up to 32 characters)
WINS
Config
- Select the WINS configuration mode.
WINS
Server
Primary
Specify the IP address of the primary WINS
server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server Primary
Specify the IP address of the primary DNS server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
- Set the machine to allocate the IP address from
the link-local address range automatically.
IPv6
- Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs &
Troubleshooting page on the Brother Solutions
Center at support.brother.com.
Setup Wizard
- - Configure your wireless network settings manually.
WLAN Assistant
- - Configure your wireless network settings using the
Brother installation disc.
WPS
- - Configure your wireless network settings using the
one-button push method.
587
Loading ...
Loading ...
Loading ...