Loading ...
Loading ...
Loading ...
96 GETTING TO KNOW YOUR VEHICLE
2. With the side gates open, position the
divider so the outboard ends align with the
intended slots in the sides of the bed.
Aligning Gate To Slots
3. Rotate the side gates closed so that the
outboard ends are secured into the
intended slots of the bed.
4. Rotate the center handle horizontally to
secure the side gates in the closed position.
Side Gates Closed
5. Lock the center handle to secure the panel
into place.
Storage Position
The storage position for the bed divider is at the
front of the truck bed which maximizes the bed
cargo area when not in use.
To install the bed divider into the storage
position, perform the same steps as you would
for the divider position, except position the
divider fully forward in the bed against the front
panel.
Storage Position
The outboard ends should be positioned in front
of the cargo tie-down loops.
Cargo Tie-Down Loop
21_DT_OM_EN_USC_t.book Page 96
Loading ...
Loading ...
Loading ...