Loading ...
Loading ...
Loading ...
7 When you have finished processing, turn the speed selector to 0
and unplug the appliance (Fig. 4).
- While the appliance is running, you can put liquid or solid ingredients
in the blender jar through the opening in the lid (Fig. 36).
- The longer you let the appliance run, the finer the blending result will
be.
- Pre-cut solid ingredients into smaller pieces before you put them in
the blender jar. If you want to prepare a large quantity, process small
batches of ingredients instead of a large quantity at once.
- To crush ice cubes, put the cubes in the jar, close the lid and press the
pulse/Easy Clean button.
- Some ingredients, e.g. fruits, are easier to blend if you add some liquid
e.g. lemon juice.
- When you blend soup, use cooked ingredients.
- If you are not satisfied with the results, let the appliance run briefly a
number of times by pressing the pulse/Easy Clean button. You can
also try to get a better result by stirring the ingredients with a spatula
(not while the blender is running), or by pouring out some of the
contents in order to process a smaller amount.
- When you process a liquid that is hot or tends to foam (e.g. milk), do
not put more than 1 litre in the blender jar to avoid spillage.
- If food sticks to the wall of the blender jar, switch off the appliance
and unplug it. Then use a spatula to remove the food from the wall.
Citrus press (HR7772 only)
You can use the citrus press to squeeze fresh fruit juices. Pulp, pips and
skins are removed from the juice.
1 Put the tool holder in the bowl (Fig. 9).
2 Put the citrus press on the tool holder in the bowl (Fig. 37).
Note: Make sure the projection on the sieve locks into the slot of the bowl
handle.
3 Select the speed that corresponds with the colour of the
accessory (Fig. 29).
4 Press the citrus fruit onto the cone (Fig. 38).
Note: Stop pressing from time to time to remove the pulp from the sieve.
Note: When you want to remove pulp from the sieve turn the speed selector
to 0 to switch off the appliance.
5 When you have finished processing, turn the speed selector to 0
and unplug the appliance (Fig. 30).
Cleaning
1 Make sure the appliance is switched off and unplugged.
2 Clean the motor unit with a moist cloth.
Never immerse the motor unit in water nor rinse it under the tap.
3 Clean the parts that have come into contact with food in hot water
with some washing-up liquid immediately after use.
Clean the blade unit of the food processor, the discs, the blade unit of
the blender very carefully. The cutting edges are very sharp.
Note: All parts, except the motor unit, can also be cleaned in the dishwasher.
- Make sure that the cutting edges of the blades and the discs do not
come into contact with hard objects. This could cause them to
become blunt.
- You can pull the beaters out of the balloon beater to clean them
separately.
1 Pour lukewarm water (not more than 0.5 litres) and some
washing-up liquid into the food processor bowl or blender
jar. (Fig. 39)
2 Place the lid on the food processor bowl or blender jar (1) and
turn it clockwise to fix it (2).
3 Press the pulse/Easy Clean button (Fig. 14).
ENGLISH 11
Loading ...
Loading ...
Loading ...