Loading ...
Loading ...
Loading ...
Overflow security
Something (an object or a liquid) is pressing any key during more
than 5s. 2 Short Beep + 1 Long beep every 30s while the key is
pressed. Cook-top will turn Off. This symbol will maintain
blinking while the matter persist.
Timer
To activate timer, heater must be selected and its power level must
be greater than “0”.
Two different options:
11.1 Touch control has its own timer display (See above figure)
Select the zone to be timed. Power level of the zone greater than 0.
Static is displayed in the zone being timed . "0 0" in the digits
reserved for the timer.
1) With "+" or "-" keys, timer time can be chosen. No Beeps at time
change.
2) Pressing simultaneously timer "+/-" keys the timer is cancelled
(goes to 00).
3) If timer "+" or "-" keys is maintained pressed during TBD time,
there is quick setting.
4) When setting timer time, it is possible to go from "00" to "99" with
"-" key, and from "99" to "00" with "+" key.
5) Maximum time 99 minutes.
6) When the time is elapsed and the hob is beeping, press any key
and the alarm and digit sequence will end.
7) It is possible to adjust the timer time while the timer is previously
running.
8) Power of timed zone can be modified without consequences on
the timer programming.
9) Last minute will be displayed by seconds (For Variants only
visible if we enter the timer programming while the last minute of
the countdown)
10) Pressing the Timer key without any selected zone and when no
zone is being timed, does nothing.
11) Pressing the Timer key without any selected zone and when
many zones are being timed, the time shown in time digits
changes in a rotatory way, and shows the time whose power
display has the decimal point ON.
12) Alternatively Power (5s and 0,5s) is displayed in the zone
being timed.
Remaining time is displayed in the digits reserved for the timer. If
multiple zones are timed, the smallest remaining time is displayed,
and the decimal point is displayed in the corresponding zone.
10 GB- IE
Residual Heat Indicator (In radiant heaters-> calculated)
The same indicators can be used for “residual heat” indication as
well. A time table must be defined on this purpose: Rest Heat
time=f (power level, working time).
While a temperature on the cook top glass surface is above
65 Cb(theory value), this condition will be shown in the associated
o
display, by means of an “H”.
To generate a temperature above 65 C a heating element has to
o
be in operation for certain time, this time depends on the power
level. Once this time has expired, the residual heat warning will be
shown when the heating element is switched off.
Automatic Safety Off
If the power level is not changed during a preset time, the
corresponding heater turns off automatically.
The maximum time a heater can stay on, depends on the selected
cooking level.
Power level
Max. time on (hours)
1
2
3
4
5
6
7
8
9
10
5
5
4
3
2
2
2
2
NOTE: while an overheating situation should occur during the
operation of the highest power levels, the Hob control will
automatically adjust the power level in order to protect the hob
from overheating.
7. CLEANING AND MAINTENANCE
. Before carrying out any maintenance work on the hob, allow it to
cool down.
. Only products, (creams and scrapers) specifically designed for
aglass ceramic surfaces should be used. They are obtainable from
hardware stores.
. Avoid spillages, as anything which falls on to the hob surface will
quickly burn and will make cleaning more difficult.
. It is advisable to keep away from the hob all substances which are
liable to melt, such as plastic items, sugar, or sugar-based products.
MAINTENANCE:
- Place a few drops of the specialised cleaning product on the hob
surface.
- Rub any stubborn stains with a soft cloth or with slightly damp
kitchen paper.
- Wipe with a soft cloth or dry kitchen paper until the surface is clean.
If there are still some stubborn stains:
- Place a few more drops of specialised cleaning fluid on the surface.
- Scrape with a scraper, holding it at an angle of 30° to the hob, until
the stains disappear.
- Wipe with a soft cloth or dry kitchen paper until the surface is clean.
- Repeat the operation if necessary.
after that switching off segment by segment in right direction,
continously.
The stop function will finish:
if the “timer +/- keys” (together) are touched for more than ½ second a
beep sounds and the heaters actual power setting and timer
countdowns are restored, or if the cooktop is stopped for more than 10
minutes the cooktop is switched off automatically.
Loading ...
Loading ...
Loading ...