Loading ...
Loading ...
Loading ...
24
Channel Setting
This recorder can receive a maximum of 181
channels as shown below by presetting the
channels into memory.
(VHF: 2 to 13, UHF: 14 to 69, CATV: 1 to 125)
Important!
When you use the recorder for the first time,
press SETUP/FUNCTION. “OSD
LANGUAGE SETUP” screen appears. You
should set the language to be used in the
OSD. See “OSD Language Setting” on page
27 for details.
1
Press SETUP/FUNCTION.
Select “CHANNEL” with ' / "
and then press SET/ENTER.
SETUP
PLAYBACK
RECORD
DISC
CLOCK
CHANNEL
OPTION
OSD LANGUAGE
SELECT
RETURNENTER
ENTER
2
Press \ / | to select “AIR” or
“CATV” and then press ".
Example: AIR
• To watch CATV after EZ Set Up,
select “CATV”, and then press SET/
ENTER.
3
Press \ / | to set “CH SET” to
“AUTO” then press SET/ENTER.
AIR/CATV AIR CATV
CHANNEL PRESET
CH SET AUTO MANUAL
4
The automatic tuning will start.
• The channel display will count up,
and when finished, the screen returns
to normal.
NOTE
• Automatic tuning will not start unless the
arrow is at “CH SET-AUTO” position.
• If a button is not pressed within 3 minutes
during the setting procedure, the screen
will return to normal.
•
If the power is interrupted for more than
1 hour, AIR / CATV selection must be set again.
• Automatic tuning will be interrupted if
SETUP/FUNCTION is pressed before the
screen returns to normal.
Channel Setting
100
EDIT
OPEN/
CLOSE
POWER
SKIP
SEARCH
AUDIO
TIMER
ON/OFF
TITLE
MENU
ANGLE
DNR
RETURN
REV FWD
SET/
ENTER
VCR PLUS
+
TIMER PROG.
REC MODE
PROGRAM
AM/ PM ERASE
STILL/PAUSE
REC
PLAY
STOP
SLOW
SKIP
F.ADV
ORIGINAL/
PLAY LIST
DISC
TIMER
CH
DISPLAY
ON
SCREEN
POWER
INPUT
VOL
CH
TV CONTROL
SETUP/
FUNCTION
ZOOM
INPUT
Adding Channel Memory/
Erasing Channel Memory
Use this function to manually add or erase
channels to/from the memory.
1
Select the channel to be added
with the number buttons and the
channel to be erased with the CH
' / " or number buttons.
2
Press SETUP/FUNCTION. The
MENU screen appears. Press ' /
" to select “CHANNEL” and then
press SET/ENTER.
3
Press ' / " to select “CH SET”
and then press \ / | to select
“MANUAL”. Then press SET/
ENTER.
AIR/CATV AIR CATV
CH SET AUTO MANUAL
CHANNEL PRESET
4
Press \ / | to select “ADD” if you
want to add the channel memory
or “ERASE” if you want to erase
the channel memory.
[ADD]
ADD 03
\ / |
[ERASE]
ERASE 03
5
Press RETURN to return to the
CHANNEL PRESET screen.
DV_RW2U#p24-28.p65 03.1.9, 7:33 PM24
Loading ...
Loading ...
Loading ...